DEK basic operation training

First, the main screen menu:

1. RUN: run

2. HEAD: press this key, the screen prompts to press the two control buttons to raise the head

3. PASTE LOAD: Add solder paste

4. CLEAN SCREEN: clean steel mesh

5. ADJUST: correction

6. SET UP: set

7. MONITOR: surveillance (internal production information)

Second, choose a program modify the program:

1. Press SET UP to enter LOAD DATA, use the up down keys to a program, press LOAD to load an existing program.

2. Press SET UP to enter EDIT DATA, modify the name content;

3. PRODUCT NAME: program name

4. CUSTOM SCREEN: Steel mesh customer

5. SCREEN IMAGE: The steel screen has edges centers.

6. DIST TO ZMAGE: area to screen

7. BOARD WIDTH: board width

8. BOARD LENGTH: board length

9, BOARD THICKNESS: board thickness

10. PRINT SPEED: printing speed

11. PRINT FRONT LIMIT: Limit before printing

12, PRINT REAR LIMIT: limit after printing

13. FRONT PRESSURE: front scraper pressure

14. REAR PRESSURE: rear scraper pressure

15. PRINT GAP: Printing gap

16. UNDER CLEARANCE: The descending interval, the distance is restored at the separation speed to the original speed

17, SEPARATION SPEED: separation speed

18. STOP CYCLE AFTER: one cycle stops, it stops automatically after setting a certain number of prints

19. PRINT MODE: print mode, PRINT / PTINT

20. SCREEN CLEAN MODE: Stencil cleaning mode

21. SCREEN CLEAN RATE: the number of steel mesh cleaning

22, DRY CLEAN SPEED: dry erase speed

23. WET CLEAN SPEED: Wet wipe speed

24. VAC CLEAN SPEED: Vacuum cleaning speed

25. FRONT SEART OFFSET

26. REAR SEART OFFSET

27. BOARD 1 FIO TYPE PCB: The first is a quasi-symbol type

28. SCREEN 1 FIO TYPE: the first reference symbol type of steel mesh

29. FIDUCIAL 1 X Y: X Y coordinates of the first reference symbol

30. FORWARD X Y Q OFFSET: X, Y, Q compensation for forward printing

31. REVERSE X Y Q OFFSET: Compensation for X, Y, Q printed in reverse

32. ALIGNMENT MODE: queue type, usually using two reference symbols

33. BOARD STOP X: X position of stop plate

34. BOARD STOP Y: position in stop Y direction