DEK basic operation training
First, the main screen menu:
1. RUN: run
2. HEAD: press this key, the screen prompts to press the two control buttons to raise the head
3. PASTE LOAD: Add solder paste
4. CLEAN SCREEN: clean steel mesh
5. ADJUST: correction
6. SET UP: set
7. MONITOR: surveillance (internal production information)
Second, choose a program modify the program:
1. Press SET UP to enter LOAD DATA, use the up down keys to a program, press LOAD to load an existing program.
2. Press SET UP to enter EDIT DATA, modify the name content;
3. PRODUCT NAME: program name
4. CUSTOM SCREEN: Steel mesh customer
5. SCREEN IMAGE: The steel screen has edges centers.
6. DIST TO ZMAGE: area to screen
7. BOARD WIDTH: board width
8. BOARD LENGTH: board length
9, BOARD THICKNESS: board thickness
10. PRINT SPEED: printing speed
11. PRINT FRONT LIMIT: Limit before printing
12, PRINT REAR LIMIT: limit after printing
13. FRONT PRESSURE: front scraper pressure
14. REAR PRESSURE: rear scraper pressure
15. PRINT GAP: Printing gap
16. UNDER CLEARANCE: The descending interval, the distance is restored at the separation speed to the original speed
17, SEPARATION SPEED: separation speed
18. STOP CYCLE AFTER: one cycle stops, it stops automatically after setting a certain number of prints
19. PRINT MODE: print mode, PRINT / PTINT
20. SCREEN CLEAN MODE: Stencil cleaning mode
21. SCREEN CLEAN RATE: the number of steel mesh cleaning
22, DRY CLEAN SPEED: dry erase speed
23. WET CLEAN SPEED: Wet wipe speed
24. VAC CLEAN SPEED: Vacuum cleaning speed
25. FRONT SEART OFFSET
26. REAR SEART OFFSET
27. BOARD 1 FIO TYPE PCB: The first is a quasi-symbol type
28. SCREEN 1 FIO TYPE: the first reference symbol type of steel mesh
29. FIDUCIAL 1 X Y: X Y coordinates of the first reference symbol
30. FORWARD X Y Q OFFSET: X, Y, Q compensation for forward printing
31. REVERSE X Y Q OFFSET: Compensation for X, Y, Q printed in reverse
32. ALIGNMENT MODE: queue type, usually using two reference symbols
33. BOARD STOP X: X position of stop plate
34. BOARD STOP Y: position in stop Y direction
13962439646
Address: No.333 Youbi Road, Zhoushi Town, Kunshan City, Suzhou City
Email: srd@kunshansmt.cn