Used smt mounter
smt贴片机回收
your current location : Home >> 贵州 Mounter repair

贵州 Placement machine failure

2020-02-09
times
贵州 Placement machine failure
Detailed introduction:

Trouble two: Large part placement deviation

Used placement machine manufacturers

Mounting machine failure: A friend has used the Yamaha mounter YV1OO, which is mainly used to mount chip components. At one time, the machine had a very large error in the patch pair, which caused poor welding. We subsequently corrected the machine parameters of the machine, but after a while of normal production, the machine "relapsed again."


 


  Troubleshooting analysis: We judged that the problem was caused by software, checked the hardware of the machine. During the inspection process, the CCD camera was found to be loose! Fix the CCD camera tightly reset the relevant parameters of the machine. Similar problems did occur after re-production.




   Because the SMT placement machine has a large vibration during the production process, it is necessary to check the fixing of some devices on the machine frequently.


PreviousMounter failure2020-02-09

National Hotline

13962439646

Address: No.333 Youbi Road, Zhoushi Town, Kunshan City, Suzhou City
Email: srd@kunshansmt.cn

Suzhou patch processing

Copyright © Kunshan Senruida Electromechanical Equipment Co., All rights reserved record number: Su ICP No.19071549 Specializing in 贵州 Used smt mounter,贵州 used mounter manufacturers,贵州 smt mounter recycling