Maintenance of used placement machine:

No matter what kind of equipment, its use condition will gradually deteriorate with the increase of the service life. At this time, the cooperation of various parts will naturally produce different degrees of wear looseness. The LED chip mounter tells you that the internal lubrication of the machine is completely replaced, the second-hand chip mounter the water oil contained in the air circuit, the dust other problems caused by improper environmental control will also cause a large amount of internal machinery. Dust dirt, if the targeted protection maintenance are carried out in a timely manner, it will naturally affect the normal operation of the placement machine, may even cause excessive wear to certain components, even more. Those who have caused serious accidents. Therefore, we must regularly maintain the equipment of the machine in accordance with scientific maintenance methods technical specifications, then always work well for each part of the machine to achieve full life.

The purpose of large maintenance: (1) clean the dust dirt on the surface of the machine the circuit board, so as to avoid poor heat dissipation inside the machine due to dust dirt, which will cause electrical parts to overheat burn out;

(2) Dismantle clean the internal gas path, solenoid valve, vacuum generating device, cylinder, etc. of the machine; if the oil scale in the gas path cannot be cleaned in time, then the gas path will be blocked. It will also cause the gas path to be unsmooth eventually cause high throwing; even oil stains that may accumulate in the gas path will corrode various internal sealing rings components such as solenoid valves, vacuum generators, cylinders, etc. Eventually it will lead to the damage of the components, which will seriously affect the normal use of the machine.