How to guarantee the operation of second-hand placement machine?

To ensure the normal operation of second-hand placement machines, in addition to ensuring that the wiring power are normal, it is also necessary to ensure that no problems occur inside the equipment. If the cantilever of the placement machine encounters obstacles (bulk boxes, etc.) during operation, it will cause failure, in severe cases, it will even cause the cantilever scrap machine to be paralyzed. So how to ensure the normal operation of the used placement machine?

1. Feeder gland. When the material rack gland buckle is good, the height of the gland will be higher than the low point of the cantilever, which will cause the material rack the cantilever to be damaged during the operation of the machine. Very serious consequences. So be sure to make sure that everything is changed before starting the machine, the material rack should be placed stably.

2. Bulk material box, the bulk material box needs to be fixed, the height of the loose material box will also exceed the cantilever low point. The machine will also be damaged during operation. Make sure that the bulk material boxes are placed fixed before starting.

3. If the feeder cover buckle is good, it will crash the machine. Make sure that the glands are fastened before starting the machine. Prevent collision